1. Measure your wall
Enter your wall dimensions into our online panelling calculator.

2. Choose your layout
Use the calculator to find the panel arrangement and spacing that works best for your room.

3. Order your kit
We prepare your panelling ready for installation.

4. Peel & stick
Mark out your positions, remove the adhesive backing and firmly press each section onto the wall.

5. Paint & enjoy
For a professional finish, apply decorator’s caulk around the edges and any small gaps before painting. Once dry, paint your panelling in your chosen colour for a seamless, built-in look.

Beautiful wall panelling. Without the complicated bit.

Our decorative wall panelling is made using real pine moulding, chosen to give the detailed, traditional profile and quality finish associated with timber panelling.

As pine is a natural material, you may notice slight variations in the grain, small knots or occasional minor surface imperfections. These are normal characteristics of real timber and do not affect the finished appearance of your panelling.

As part of the final decorating process, we recommend lightly sanding and filling any small imperfections where required before painting. Once prepared and painted, these will blend seamlessly into the finished wall.

Each kit contains the decorative pine moulding frames required to create the number and size of panels selected when ordering.

Every panel is supplied with our high-strength mounting tape pre-applied to the reverse, ready for installation.

Note: If ordering a panel with a dado rail, this will add the dado rail as a separate product in your basket.

Material: Pine decorative moulding
Moulding profile: 32mm × 12mm
High-strength mounting tape pre-applied
Made to your selected panel width and style
Suitable for interior use
Designed to be painted after installation

For the best adhesion, your wall should be clean, dry, smooth and free from dust, grease or loose/flaking paint.

We strongly recommend positioning your panelling using low-tack masking tape before removing the adhesive backing. This allows you to check your spacing, levels and overall layout before permanently fixing the panels in place.

Once the adhesive backing has been removed and the panelling has been firmly pressed onto the wall, it is designed to create a strong bond, so take care when positioning each piece.